AUDIO SPOTLIGHTING
INTRODUCTION
n Audio spot lighting is a very recent technology that creates focused beams of sound similar to light beams coming out of a flashlight. By ‘shining’ sound to one location, specific listeners can be targeted with sound without others nearby hearing it, ie to focus sound into a coherent and highly directional beam. It uses a combination of non-linear acoustics and some fancy mathematics. But it is real and is fine to knock the socks of any conventional loud speaker.
n The Audio Spotlight & Hyper Sonic Sound Technology (developed by American Technology Corporation), uses ultrasonic energy to create extremely narrow beams of sound that behave like beams of light. Audio spotlighting exploits the property of non-linearity of air. When inaudible ultrasound pulses are fired into the air, it spontaneously converts the inaudible ultrasound into audible sound tones, hence proved that as with water, sound propagation in air is just as non-linear, and can be calculated mathematically. A device known as a parametric array employs the non-linearity of the air to create audible by-products from inaudible ultrasound, resulting in an extremely directive, beamlike wide-band acoustical source. This source can be projected about an area much like a spotlight, and creates an actual specialized sound distant from the transducer. The ultrasound column acts as an airborne speaker, and as the beam moves through the air, gradual distortion takes place in a predictable way. This gives rise to audible components that can be accurately predicted and precisely controlled
THEORY
n IN TO THE DEPTHS OF AUDIO SPOTLIGHTING TECHNOLOGY
n About a half-dozen commonly used speaker types are in general use today. They range from piezoelectric tweeters that recreate the high end of the audio spectrum, to various kinds of mid-range speakers and woofers that produce the lower frequencies. Even the most sophisticated hi-fi speakers have a difficult time in reproducing clean bass, and generally rely on a large woofer/enclosure combination to assist in the task. Whether they be dynamic, electrostatic, or some other transducer-based design, all loudspeakers today have one thing in common: they are direct radiating-- that is, they are fundamentally a piston-like device designed to directly pump air molecules into motion to create the audible sound waves we hear. The audible portions of sound tend to spread out in all directions from the point of origin. They do not travel as narrow beams—which is why you don’t need to be right in front of a radio to hear music. In fact, the beam angle of audible sound is very wide, just about 360 degrees. This effectively means the sound that you hear will be propagated through air equally in all directions.
n In order to focus sound into a narrow beam, you need to maintain a low beam angle that is dictated by wavelength. The smaller the wavelength, the less the beam angle, and hence, the more focused the sound. Unfortunately, most of the human-audible sound is a mixture of signals with varying wavelengths—between 2 cms to 17 meters (the human hearing ranges from a frequency of 20 Hz to 20,000 Hz). Hence, except for very low wavelengths, just about the entire audible spectrum tends to spread out at 360 degrees. To create a narrow sound beam, the aperture size of the source also matters—a large loudspeaker will focus sound over a smaller area. If the source loudspeaker can be made several times bigger than the wavelength of the sound transmitted, then a finely focused beam can be created. The problem here is that this is not a very practical solution. To ensure that the shortest audible wavelengths are focused into a beam, a loudspeaker about 10 meters across is required, and to guarantee that all the audible wavelengths are focused, even bigger loudspeakers are needed.
A COMPARISON WITH CONVENTIONAL LOUD SPEAKER:-
n Creates highly FOCUSED BEAM of sound
n Sharper directivity than conventional loud speakers using Self demodulation of finite amplitude ultrasound with very small wavelength as the carrrier.
n Uses inherent non-linearity of air for demodulation
n Components- A thin circular transducer array, a signal processor & an amplifier.
n Two ways to use- Direct & projected audio
n Wide range of applications
n Highly cost effective
DIRECT AUDIO AND PROJECTED AUDIO
n There are two ways to use Audio Spotlight. First, it can direct sound at a specific target, creating a contained area of listening space which is called “Direct Audio”. Second, it can bounce off of a second object, creating an audio image. This audio image gives the illusion of a loudspeaker, which the listener perceives as the source of sound, which is called “projected Audio”. This is similar to the way light bounces off of objects. In either case, the sound’s source is not the physical device you see, but the invisible ultrasound beam that generates it
n Hyper Sonic Sound technology provides linear frequency response with virtually none of the forms of distortion associated with conventional speakers. Physical size no longer defines fidelity. The faithful reproduction of sound is freed from bulky enclosures. There are no, woofers, tweeters, crossovers, or bulky enclosures. Thus it helps to visualize the traditional loudspeaker as a light bulb, and HSS technology as a spotlight, that is you can direct the ultrasonic emitter toward a hard surface, a wall for instance, and the listener perceives the sound as coming from the spot on the wall. The listener does not perceive the sound as emanating from the face of the transducer, only from the reflection off the wall.
n Contouring the face of the HSS ultrasonic emitter can tightly control Dispersion of the audio wave front. For example, a very narrow wave front might be developed for use on the two sides of a computer screen while a home theater system might require a broader wave front to envelop multiple listeners.
n The performance and reliability of the Audio Spotlight have made it the choice of the Smithsonian Institution, Motorola, Kraft, and Cisco Systems etc.
n Holosonics put in four individual Audio Spotlights into the Daimler Chrysler MAXXcab prototype truck to let all the passengers enjoy their own choice of music. Boston Museum of Science - as well as the United States military.
n There is an even bigger market for personalized sound systems in entertainment and consumer electronics.
n Holosonic Labs is working on another interesting application at the Boston Museum of Science that allows the intended listeners to understand and hear explanations, without raising the ambient sound levels. The idea is that museum exhibits can be discretely wired up with tiny speaker domes that can unobtrusively, provide explanations.
n There are also other interesting applications that they are looking at, such as private messaging using this system without headphones special effects at presentations as well as special sound theme parks that could put up animated sound displays similar to today’s light shows. Holosonic has installed their Audio Spotlight system at Tokyo’s Sega Joyopolis theme park.
n The US Navy has installed sound beaming technology on the deck of an Aegis-class Navy destroyer, and is looking at this as a substitute to the radio operator’s headphones.
Comments